Print Page - windshield corner trim screw hole

Title: windshield corner trim screw hole
Post by: tparker on January 07, 2023, 05:12:59 PM

I had to repair the lower window channel due to rot a whole back. Now I am putting the trim back on but the corner trim has a screw that holds it in place and I need to deal with that. The original had a hole what was raised a bit to support the screw threads if I remember correctly. Has any one had to add the hole? Did you just drill a hole the size of the screw or something fancier?

Here is a pic from 70 Challenger Lover's post showing the chrome trim.
(https://forum.e-bodies.org/dlattach/topic=12652.0;attach=110766;image)

Thanks

Title: Re: windshield corner trim screw hole
Post by: Rich G. on January 08, 2023, 06:48:40 AM

Just drill the hole. Just don't crank the heck out of it when you tighten it.

Title: Re: windshield corner trim screw hole
Post by: anlauto on January 08, 2023, 07:39:45 AM

Quote from: Rich G. on January 08, 2023, 06:48:40 AM
Just drill the hole. Just don't crank the heck out of it when you tighten it.

:iagree: just drill away :bigthumb:

Title: Re: windshield corner trim screw hole
Post by: tparker on January 08, 2023, 11:59:37 AM

thanks

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: tparker on January 07, 2023, 05:12:59 PM