E-Bodies.org Cuda Challenger Forum

Got my original taillight bezels re chromed.
Need to paint the edge.
Is it meant to satin black and should I lightly sand the edge primer then paint.

Here's a post on the topic from when I did mine.  I used the Fine Line tape and SEM self-etch primer and SEM Trim Black.  I scuffed the areas that need paint with either steel wool or scotch brute (can't recall).  Great results with the paint and masking tape.

https://forum.e-bodies.org/body-shop/5/best-masking-tapetechnique-for-clean-paint-line/16685/

Did it thanks guys.
What a difference

Are these visible when mounted
Should I paint them black also

Yes.
Technically, the factory painted the bezels as an assembly.  On many original housings you can see a black overspray line on the top surface.

@70rtse (https://forum.e-bodies.org/mlist/70rtse_2668)

What is the name and location of the chrome shop that you used to have the taillight bezels rechromed ?

Thanks