Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Interior => Topic started by: Cuda_mark on July 24, 2017, 09:12:41 AM

Title: Question about interior shaker cable
Post by: Cuda_mark on July 24, 2017, 09:12:41 AM
I know that the reproduction shaker cables have a decal for the carb air callout.

Were the originals painted/silkscreened or were they also a decal?

Anyone have pictures of an original they can share?
Title: Re: Question about interior shaker cable
Post by: Cuda Cody on July 24, 2017, 09:29:17 AM
Top two are original, bottom is the reproduction.
Title: Re: Question about interior shaker cable
Post by: fc7cuda on July 24, 2017, 10:31:01 AM
They are a metal foil tag, ECS makes a spot on replacement. :alan2cents:
Title: Re: Question about interior shaker cable
Post by: Cuda_mark on July 24, 2017, 12:20:33 PM
Quote from: fc7cuda on July 24, 2017, 10:31:01 AM
They are a metal foil tag, ECS makes a spot on replacement. :alan2cents:

The actually pull handle looks a little larger on the original ones though so I'm guessing you cant use the foil from ECS on an aftermarket cable.
Title: Re: Question about interior shaker cable
Post by: Cuda Cody on July 24, 2017, 12:50:00 PM
Might just be the way I took the photo.  I don't think there was a difference that I could easily see in the size.
Text only | Text with Images