Houston "WE" have a problem, or do "WE"? :takealook:
Engine builder vs. Engine Assembler, illustrated.
They thought they were assembling a Ford.
Big problem !
They'll find out as soon as they crank it over. 😩
Painted the block with wrong color? Just kidding. Is this about having a wrong crankshaft installed, asking not familiar with big block. How can this happen?
Half right anyhow..... :smile:
(https://www.twinstuff.com/wp-content/uploads/2017/05/Fotolia_129999775_S.jpg)
Well I'm not an engine builder or even an engine assembler but I'm guessing that a couple of the connecting rods are coming off the crank at the wrong angle. :notsure:
Should the valve "reliefs" be on the bottom ?
2 things wrong....?
Dome should be in combustion chamber unless some trick quench design with low compression heads, (pistons upside down, wrong side?)
valves.... exhaust , intake, intake, exhaust, exhaust, intake, intake, exhaust
Yep, pistons out of order per valve type loaction in cylinder heads. Per Brads70. There will be a valve relief problem with a couple of intake valves per bank.