4 spd conversion parts
Pedals
firewall support bracket
pushrod [pedal to Z bar ]
Z bar [different widths for big & small block ]+ nylon bushings
Frame pivot bracket
pivot balls
adjuster link [Zbar to fork ]
release fork
belhousing or blashshield
release brg
clutch assbly
Flywheel [requires differnt crank bolts than flex plate ]7/16 x 1"
pilot bushing or brg
differnt crossmember , on pre 69 B bodies
floor hump
tranny
shifter mechanism & rods & levers
shift handle + boot & ring
clips to hold pushrod & adjuster to Z bar
Many of these parts are still available from Mopar , other parts are available from Brewers performance , Passon perf , Keisler , Mcleod , Lakewood , Hays , Ram , Mancini
And the hardest part to find/get...Clutch safety switch.
Also the reverse wire harness and dash reverse light should be on the list.
thanks you just added them !!
I have to read over some of this stuff & make sure it si complete & add part #s too
One more I can think of...the 3 clips that hold the reverse wire harness