So, I purchased a 70 Rallye gauges and bezel off of e-bay. I am going to put it together, it needs work. I started purchase pieces to restore it. I needed the clock cable, it also state I should also order the nut. So I did. I looked at the parts and service manual and I don't see which end and how its threaded onto the gauge cluster or the clock. Can someone explain this to me or better yet a picture as well.
Thanks, Jeff
Hi
The round nut attaches the adjusting pin end to the dash frame (first image). It's easier if you do that first. Since I'm a cheap b*astard, I used a pair of long nosed pliers instead of the installation tool (third image). The end with the captured thumb nut screws onto the clock (second image).
Hope this helps