Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) => Topic started by: 1970 cuda Joe on May 22, 2024, 03:13:08 PM

Title: Radio connector in main harness
Post by: 1970 cuda Joe on May 22, 2024, 03:13:08 PM
After going blind looking in the assm manual, there appears to have been a 3 wire connector or a 4 wire connector coming out of the main harness for the radio. I think I'm seeing that correctly. Does the connection say anything about the radio or radio equipment the car once had? For the record....1970 cuda. Thanks again, Joe
Title: Re: Radio connector in main harness
Post by: Skdmark on May 22, 2024, 07:04:55 PM
Fender tag or BC sheet would be your best bet.

Good thread on radio options
https://forum.e-bodies.org/reference-material/18/radio-options-r11-r22-r26-r31-r32-r33-r35-r36/348/
Title: Re: Radio connector in main harness
Post by: 1970 cuda Joe on May 22, 2024, 08:14:57 PM
I wish I had them. I know the car has fader....Joe

Thanks for the link
Title: Re: Radio connector in main harness
Post by: Skdmark on May 23, 2024, 05:32:30 PM
How many speaker's in the dash?
Is the fader a single or double pot?
Title: Re: Radio connector in main harness
Post by: 1970 cuda Joe on May 23, 2024, 05:57:54 PM
Quote from: Skdmark on May 23, 2024, 05:32:30 PMHow many speaker's in the dash?
Is the fader a single or double pot?


Originally it had one front & one rear....Joe
Text only | Text with Images