Print Page - Motor mount Identification

Title: Motor mount Identification
Post by: fc7cuda on January 20, 2025, 03:28:05 PM

Does anyone recognize this motor mount bracket? Thanks

Title: Re: Motor mount Identification
Post by: Floyd on January 20, 2025, 04:05:55 PM

I'm thinking LH 318 but don't have the measurements handy.

Title: Re: Motor mount bracket Identification
Post by: fc7cuda on January 20, 2025, 05:55:29 PM

I have that image too, thought it might be closer to the narrower 340 mount bracket.

Anyone with a measurement?

Title: Re: Motor mount Identification
Post by: Floyd on January 20, 2025, 07:22:24 PM

I don't have measurements but on second thought, the area circled in red does appear to match yours. I have an extra RH mount that I can measure tomorrow. That should give you the wider measurement that would match a 318 mount.

Title: Re: Motor mount Identification
Post by: Floyd on January 21, 2025, 02:05:36 PM

Not sure these will help.

Title: Re: Motor mount Identification
Post by: fc7cuda on January 21, 2025, 07:57:54 PM

@Floyd
Thanks for the pics.

My bracket appears to match the one in this thread for a 340.

https://forum.e-bodies.org/engine-transmission-and-rear-end/4/340-engine-mount-brackets/7531/

E-Bodies.org Cuda Challenger Forum

Off-Topic => General Topics => Topic started by: fc7cuda on January 20, 2025, 03:28:05 PM