- 70 N-code Challenger, lots of rust in typical places and crashed very long time a go, maybe 70´s? Came from Michigan, maybe someone remembers this car? Had a very unique custom hood, with a Ford side Windows!.
Crash damage was repaired very poorly and needs new front frame rails etc. Have a complete rust free front frame from ´71 Challenger and that should help to bring this rust bucket back to life. Original engine missing, so it will have a 512 cid mild stroker, 4spd and Dana 60....top banana w/ black vinyl roof and interior and black stripes originally and that´s how it will be again someday :finland:
Few pics....
Welcome from :canada: There's lots of knowledge here. Don't be afraid to ask questions as you go through your build.
Welcome from Colorado! Great looking project you have there! :wrenching:
:welcome: From :unitedstates: My first E-body was the same except mine had A painted black roof. sharp looking car!!! I still miss it. :1place:
:wave: Welcome from another :canada: . Ambitious project, all the best with it.
:welcome: great project, sounds like a solid plan to bring it back to life! :finland:
Welcome to the forum Rusty R/T! Looks like a fun project! I hope you will start a thread in the "Restoration" section so we can all watch it come together. Good luck!
:welcome:
Welcome from Sylmar, CA great project enjoy
Welcome from B.C. Canada. The car will get better with everything you do to it.
:welcome: from Tn.
A great big MOPAR welcome to you Rusty R/T, you've got a good start, keep the resto fires burning.
You have deffinatley found an E-Ticket ride, they were always the good ones. Thanks, Al
Welcome Rusty.
Looking forward to your progress.
this will be a beautiful car when done !!
welcome aboard !! :france: :finland:
Thanx for support! This needs a lots of work and time. Few pics more....and I know where is the sense with this project, but I felt so sad when I saw this this one. Really beated up one, but someday it will hit the streets again. Also a challenge(r) to myself
Looks good Rusty R/T. :worship:
Another welcome from Ontario, :canada: and good luck with the project. If it were me, I'd trim out the rocker stubs on that donor front end and graft the whole thing into the other one. That way you'll have all the factory welding except where you tie in the cowl and hinge pillars. Just my :alan2cents:
Thanks!
And there is a little problem, car´s orginal rockers are also wasted :)
Car will have a new AMD cowl and firewall. front frame rails, radiator support etc from donor car. Donor car´s rockers are solid.
i´ll post a another topic to restoration forum later.
Any progress updates Rusty?
Welcome Rusty
Looks like you have a lot of work to get that one restored !!
You are Making good progress :ohyeah: