Disconnect Battery
Decide the location of the relay and install
Locate the dark green wire and cut it where you want to connect the wires from the relay.
Connect the wires from the relay as follows.
White----------------Power wire, connect to battery terminal, or positive side of starter relay
Black-----------------Ground wire, connect to battery terminal, or pigtail at core support.
Green----------------Connect to the Dark Green wire you cut, from firewall.
Green/Black---------Connect to Dark Green wire you cut, to roadlamps.
Reconnect battery, test operation. Tape up wires for a clean look. Now grab a cold beer, take some pics and show us your work. :banana:
This harness looks the same as the A/C compressor harness, just wires different colors. I have 1 ready to ship @ $20.00 shipped.