I have three sets of headlight buckets and I'm not sure what ones are correct for a 1971 cuda. I think the left one is correct?. the right one is for a challenger? middle one? what ones are the correct ones? they all have the same numbers on the sets I believe.
The one on the far left in your picture looks like it's for the larger "2 Headlight" system 1970/72,73,74. :alan2cents:
that's the picture angle . they are all the same size. but they have different center hole size
All 4 buckets are different , so you need the smaller 5" ones first
then on the rim of the bucket you will see
Hi/Lo or Hi followed by R or L
As Psycho said, each car takes four different buckets....The inside hole won't really matter... You typically find the ones with the largest hole (in your picture) on 70-71's, but if you find a set with smaller holes, I wouldn't really sweat it :alan2cents: they'll still work fine.
these are the small 5" one . the picture isn't a good one. I know that there are 4 different buckets for a complete set and they are labeled accordingly. the question I have is what one is correct for a 1971 cuda. all these have the same hi, hi-lo ECT. the numbers are the same one each set. it is the center part that is different
between me and my friend we have a complete set for each style . two complete sets of the big hole ones. just wondering what one is correct
I am familiar with the ones with the large hole , not sure what the application for the others are ?
Even though with my old eyes the one on the top of your second picture still looks larger to me, :rubeyes: I would say that one has the correct size hole for 70-71
I assure you they are the same size. it looks off to me in the picture as well. I will use those ones. any idea what the middle one is off of? charger? I think the one on the right is off of a 70-71 challenger.