E-Bodies.org Cuda Challenger Forum

Technical Shop => Tools and Equipment => Topic started by: Johns Cuda Shop on February 05, 2017, 07:41:03 AM

Title: Mopar Hose nipple tools
Post by: Johns Cuda Shop on February 05, 2017, 07:41:03 AM
Hose nipple install tools for Big Block , Hemi and small block Mopars , These tools are made from Hi carbon steel and have a pilot on each tool to keep the tool from skipping off when you use. I made a short production run of these. I also have a website which these are not listed with other Specialty tools at www.custommachinecomponents.com They are $45 free USA shipping and $9 international . Email me direct at jrivinius@sc.rr.com 
Title: Re: Mopar Hose nipple tools
Post by: Cuda Cody on February 05, 2017, 07:49:54 AM
These are AWESOME!!!!  I've wanted something like this for years and ordered a set.  Can't wait to put them to use.   :clapping:
Title: Re: Mopar Hose nipple tools
Post by: anlauto on February 05, 2017, 08:20:10 AM
I bought a set of these a long time ago, they work great.
Except I found they are a lot stronger then the nipples themselves and I've often tore the nipple when tightening  :pullinghair:
Title: Re: Mopar Hose nipple tools
Post by: HP_Cuda on February 05, 2017, 10:42:06 AM

That's a great idea but I think my last set of nipples would have just torn off.

Too much rust and you will be in the same boat but for those builds where it's not that bad with a little Kroil you are set!!!
Title: Re: Mopar Hose nipple tools
Post by: anlauto on February 05, 2017, 11:14:41 AM
They're not so great for removing old rusted ones, but they're ideal for installing new ones for sure :alan2cents:
Title: Re: Mopar Hose nipple tools
Post by: 71GranCoupe on February 05, 2017, 12:01:45 PM
 :iagree:
Quote from: anlauto on February 05, 2017, 11:14:41 AM
They're not so great for removing old rusted ones, but they're ideal for installing new ones for sure :alan2cents:
Title: Re: Mopar Hose nipple tools
Post by: Johns Cuda Shop on February 05, 2017, 04:27:15 PM
Well the add said HOSE NIPPLE INSTALL TOOLS....... :dunno:
Title: Re: Mopar Hose nipple tools
Post by: anlauto on February 05, 2017, 04:47:20 PM
 :rofl: Good Point ! :brainiac: :rofl:
Title: Re: Mopar Hose nipple tools
Post by: 71GranCoupe on February 05, 2017, 05:44:56 PM
 :bricks: :bricks: :bricks:
Title: Re: Mopar Hose nipple tools
Post by: Cuda Cody on February 06, 2017, 10:12:13 PM
@Johns Cuda Shop (http://forum.e-bodies.org/index.php?action=profile;u=198)  My Hose Nipple tools showed up today!  Ran right out to the shop to test install a couple hose fittings and they work FANTASTIC!!!  Thank man!   :clapping:
Title: Re: Mopar Hose nipple tools
Post by: Brads70 on February 07, 2017, 03:41:02 AM
Quote from: Cuda Cody on February 06, 2017, 10:12:13 PM
@Johns Cuda Shop (http://forum.e-bodies.org/index.php?action=profile;u=198)  My Hose Nipple tools showed up today!  Ran right out to the shop to test install a couple hose fittings and they work FANTASTIC!!!  Thank man!   :clapping:

Did you see John's other tools eg. antenna nut tool.
Title: Re: Mopar Hose nipple tools
Post by: Cuda Cody on February 07, 2017, 08:27:19 AM
I did!!!!  I want to get one of those too. 

Quote from: Brads70 on February 07, 2017, 03:41:02 AM
Quote from: Cuda Cody on February 06, 2017, 10:12:13 PM
@Johns Cuda Shop (http://forum.e-bodies.org/index.php?action=profile;u=198)  My Hose Nipple tools showed up today!  Ran right out to the shop to test install a couple hose fittings and they work FANTASTIC!!!  Thank man!   :clapping:

Did you see John's other tools eg. antenna nut tool.