Pretty rare! :bigmoney: Good luck. Hope you find one and at a fair price.
Why not have Keith weld a new tab onto the end?
The same style of switch was used on a lot of C-bodies in the same era and you could probably scavenge the end & wires from one of those.
Alan........wish I could help. Remember the post I had with that '68-'70 "B" body N88 cruise switch. Thought it was an "E" body switch, wasn't. Wish someone needed it. It's in fantastic condition.
Thanks, Al
Quote from: 70/6chall on June 13, 2018, 01:42:41 PM
Alan........wish I could help. Remember the post I had with that '68-'70 "B" body N88 cruise switch. Thought it was an "E" body switch, wasn't. Wish someone needed it. It's in fantastic condition.
Thanks, Al
I assure you, someone would love to have it.... It's a matter of getting the two of you together..... If my 68 had the option I'd be pestering the crap outta you....
Thanks Randy, if you had a need, believe me I'd let you pester the crap outa me. I'd love to see it go to that soul in need instead of it just sitting in a drawer in a tool box. When I researched it I found not many people ordered the auto pilot option or N88 code on their '68- '70 Chargers or Daytona's.
Thanks, Al
Quote from: YYZ on June 13, 2018, 12:47:18 PM
Why not have Keith weld a new tab onto the end?
The same style of switch was used on a lot of C-bodies in the same era and you could probably scavenge the end & wires from one of those.
:iagree:
I agree, looks very fixable? :notsure:
I was going to try the welding route, just wasn't sure what type on metal it might be :thinking:
It welds fine... Like I've posted before I've made a few by welding two C body levers together....
Okay....So here's my attempt at welding. I think it turned out nice enough to say I no longer need this part. Tommy White is going to supply me with the wire connector that goes on the end, so I should be good to go !
I saw some images of one completely taken apart for a correct restoration, I think member Slotts did it, but I certainly will not be going that far....With all the after market parts on the engine, this cruise control will most likely be for show only. :dunno:
Good to go I think.
Looks nice! :bigthumb: