Are these heater hoses connected correctly. I read some places that they need to cross and other places that they lay flat (outer--pass side on firewall to front fitting on eng). Just checking that the hose nipples are correct since the heater core has 2 different size pipes coming out.
:bigthumb:
The first picture is missing the bracket that holds them up and away from the alternator and they should be strapped to the inner fender like in the second picture. :alan2cents:
Yes: Cody's looks nice. Make sure you have 1/2" and 5/8" nipples on the water pump housing to match the different hoses as well. Earlier water pumps had two nipples the same size.
Quote from: anlauto on June 13, 2018, 06:55:27 PM
The first picture is missing the bracket that holds them up and away from the alternator and they should be strapped to the inner fender like in the second picture. :alan2cents:
That pic is old...I have since installed the bracket and strap. In Cody's pic they do not cross as I have read that they are supposed to. Does it matter or does either way work?
I'm not sure why they would ever have to cross ? Cody has them correct in his picture :alan2cents:
Quote from: anlauto on June 14, 2018, 05:52:33 AM
I'm not sure why they would ever have to cross ? Cody has them correct in his picture :alan2cents:
OK...and the 5/8" hose is in the front if I remember correctly?