Can anyone tell what this motor is?
This picture is about all the information I have.
https://goo.gl/images/CwM51N
Gen 1 hemi i believe
That is a 392..... Heads are clearly aftermarket.. And they lack the water passages...
Ultra rare 350 Chebbie. 1 of 1. Oh and the other one is an early Hemmi.
Oh yeah! I'm after that Chebbie motor for sure. raaare.
I figured that looked like a first gen but wanted to make sure. 392 is the best 1st gen to have. But they aren't worth anything to me as I don't need that kind in my cuda.
There might be a 64 barracuda available as well as that 392.
Didn't 392's only come in imperials? And what kind of horse power would that thing have with the aftermarket heads?
So this motor would be good for a bucket or a rat rod or something right? That's about it though.
The more I try to figure it out the more confusing it is... The blocks a tall block (392) but the heads without water passages may be for a 331... A look at the intake ports would help... But honestly I think it's more of a show piece than anything useful... The blower looks like a Mooneyham 10-71, the blower is just sitting on the heads, no manifold.... Then the eight Stromberg 97's which are super nostalgic but not really the way to make power...
Ok so show room piece. Which is what it currently is. Sits in the collectors room.
Look here.
http://bruhnsauction.com/
Kinda looks like my buddies 331 he had sitting at his ranch for quite awhile.
I wouldn't hazard a guess without casting #'s.
The water pump bolt hole distance to the top rail is about 3/4" on a 392... 331 & 354 it's about 5/16".... So the block definitely appears to be a 392....
392 with heads on backwards to run in a boat?