Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: Challenger in NC on February 26, 2017, 09:15:34 AM

Title: M25 Wide sill molding source
Post by: Challenger in NC on February 26, 2017, 09:15:34 AM
Is SE rocker Challenger molding identical to that used on the M25 option code? Any recommended repro sources for this?

Thanks
Chris
Title: Re: M25 Wide sill molding source
Post by: Cuda Cody on February 26, 2017, 09:18:34 AM
I think it is reproduced, right?  Is this what you are looking for? @Challenger in NC (https://forum.e-bodies.org/mlist/challenger-in-nc_83)

[ebay]131879515567[/ebay]
Title: Re: M25 Wide sill molding source
Post by: 750-h2 on February 26, 2017, 09:45:53 AM
Rocker mouldings were also optional on the SE.
Title: Re: M25 Wide sill molding source
Post by: Challenger in NC on February 26, 2017, 10:14:50 AM
I believe so but not sure if the M25 molding was the same as the SE rocker moldings. My car is not an SE but has the M25 coded on the fender tag.
Title: Re: M25 Wide sill molding source
Post by: RUNCHARGER on February 26, 2017, 10:17:10 AM
I don't know if I'm allowed to mention it but I have two pair of repros FS in the classifieds. Due to shipping though it might be cheaper overall for you to just buy them retail near you.
Title: Re: M25 Wide sill molding source
Post by: Challenger in NC on February 26, 2017, 10:54:27 AM
Thanks for the offer, but you're probably right with the shipping cost.
Text only | Text with Images