Looking for a pair of E-Body 1970 440-4 valve Covers. Must be in Excellent or Mint Condition with no split holes or dents.
Contact Bob
914-843-9617 or PM
Bob, have you taken a look at the repo's from AMD? They are actually pretty good, they look right, they fit right and the set on my motor haven't leaked in over 2.5 years...
Quote from: 1 Wild R/T on November 24, 2018, 02:35:34 PM
Bob, have you taken a look at the repo's from AMD? They are actually pretty good, they look right, they fit right and the set on my motor haven't leaked in over 2.5 years...
I did think about that, but I keep seeing issues with the nuts and bolts too close. What do you say.
Also the wire tabs are a little different.
Thanks for the info Bob
Bolts to close was the first stampings from AMD, the current version seems pretty good, I had no problem putting the bolts in & having a socket fit to tighten the bolts.... Wire tabs, I didn't study them that closely... But there are three of them in the right general location & I doubt anyone is going to be taking measurements...