Print Page - Aluminum OD 4spd- requested fulfilled.

Title: Aluminum OD 4spd- requested fulfilled.
Post by: YellowThumper on January 03, 2019, 09:32:00 AM

Aluminum OD for Challenger in good working order.
Going behind 360.

Hood release lever mechanism for 72/74 Challenger.
Actual latch not needed.
When found I will have latch and internal cable release setup available.

Around area code 92821

Title: Re: Aluminum OD 4spd
Post by: jimynick on January 03, 2019, 08:28:20 PM

I'm guessing you're wanting to buy?

Title: Re: Aluminum OD 4spd
Post by: YellowThumper on January 03, 2019, 08:56:03 PM

Yes, yes I am.

Title: Re: Aluminum OD 4spd
Post by: gzig5 on January 04, 2019, 07:54:15 AM

There is a guy on the Moparts forum from Washington I think that has a few OD transmissions if you are willing to ship. I think he was reasonably priced but shipping killed it for me. I may still have his info if you are interested.

Title: Re: Aluminum OD 4spd
Post by: YellowThumper on January 04, 2019, 09:30:18 AM

Ok, thank you and yes please provide info.
I actually have family up there so it could work out.

Mike.

Title: Re: Aluminum OD 4spd
Post by: edison1970 on January 09, 2019, 05:20:52 PM

If you can find a mid 80's ram truck, the 833 od was common in the manual 2 wheel drives. I picked mine up for $125 at the local pick and pull and put it in my d100 stepside. It was behind a six so not beat up. Tail shaft will have provisions for b and e bodies.

Title: Re: Aluminum OD 4spd
Post by: rocketresto on January 09, 2019, 05:46:19 PM

I have a couple, PM me.

Title: Re: Aluminum OD 4spd
Post by: Crocha617 on January 30, 2019, 01:41:28 PM

I have one here in Massachusetts I would sell if you haven't bought one yet. Shipping would be killer though.

Title: Re: Aluminum OD 4spd
Post by: YellowThumper on January 31, 2019, 09:41:37 AM

I have one now.
Thanks

E-Bodies.org Cuda Challenger Forum

Classifieds => Parts Wanted => Topic started by: YellowThumper on January 03, 2019, 09:32:00 AM