Print Page - Champion radiator overflow fitting

Title: Champion radiator overflow fitting
Post by: Husk Challenger on January 14, 2019, 10:14:57 AM

Hey guys,

Anybody knows where i can i find the correct overflow fitting for my radiator?
There was none when i bought the car, so i bought one but 1/8 NPT is too big....

I am looking for a smaller size (1/16 NPT?) but i can't find anything!

I sent an Email to Champion but no answer....

Thanks for your help!

Title: Re: Champion radiator overflow fitting
Post by: GoodysGotaCuda on January 14, 2019, 12:04:00 PM

It's 1/16" NPT. That's one complaint i have with Champion.

I emailed them regarding what the size was, they offered to send me a new nipple if I needed on. I don't think you'll be successful on getting a hardline to fit and not hit the tank.

(https://uploads.tapatalk-cdn.com/20190114/ab4f74f963b5920fcc2eabca45a02467.jpg)

Sent from my iPhone using Tapatalk

Title: Re: Champion radiator overflow fitting
Post by: GoodysGotaCuda on January 14, 2019, 12:05:36 PM

(https://uploads.tapatalk-cdn.com/20190114/6bdbd6de495edef59c900e4c2bb650c5.jpg)

Sent from my iPhone using Tapatalk

Title: Re: Champion radiator overflow fitting
Post by: Husk Challenger on January 14, 2019, 12:52:48 PM

Thanks Mike!!

Sadly they are not listed on their website if i'm right!
I'll try to contact them one more time.... :pokeeye:

Title: Re: Champion radiator overflow fitting
Post by: CudaMoparRay on January 14, 2019, 01:15:05 PM

Same issue I had when running the Champion radiator good luck with your query.

Title: Re: Champion radiator overflow fitting
Post by: Husk Challenger on January 14, 2019, 02:22:28 PM

Well, problem solved!

They have just replied to my email and they can send me one for 3$ shipped in the US!
Great!

Thanks guys!

E-Bodies.org Cuda Challenger Forum

Technical Shop => Engine, Transmission & Rear End => Topic started by: Husk Challenger on January 14, 2019, 10:14:57 AM