E-Bodies.org Cuda Challenger Forum

Classifieds => Parts Wanted => Topic started by: Topcat on January 27, 2019, 04:26:52 PM

Title: Correct P/S return hose
Post by: Topcat on January 27, 2019, 04:26:52 PM
Need about 6" is all.

Rick is  out it appears.

https://www.ebay.com/itm/NOS-MOPAR-Power-Steering-RETURN-HOSE-Plymouth-Dodge-Chrys-67-79-383-440-318-340-/223195174933?_trksid=p2047675.m43663.l44720&nordt=true&rt=nc&orig_cvip=true

For a Federal cooler

I don't want that repro garbage that swells up then leaks all over your engine when it falls off.  :pullinghair:

Title: Re: Correct P/S return hose
Post by: tman on January 27, 2019, 04:55:23 PM
Stick with 11/32 hose.  3/8 is a hair big.  I bought Gates hose from RockAuto several years ago.  And yes, the Repro type swell up and just pop off the fitting leaving a big mess to clean up.
Title: Re: Correct P/S return hose
Post by: Topcat on January 27, 2019, 05:27:44 PM
Quote from: tman on January 27, 2019, 04:55:23 PM
Stick with 11/32 hose.  3/8 is a hair big.  I bought Gates hose from RockAuto several years ago.  And yes, the Repro type swell up and just pop off the fitting leaving a big mess to clean up.

Gotta scroll down further on the ad and it shows the right one.     ;)



Mopar NOS
Power Steering
Return Hose Kit

Correct 11/32" diameter

Power steering return hose for 1967-79 A, B, C, and E-body Mopars. Correct 11/32" diameter - not 5/16! not 3/8" Not "fuel line", NOS Mopar hose constructed to not swell under the rigors of hot hydraulic fluid. 14" length is enough for all muscle-era Mopars, even when equipped with a cooler. 2 correct red clamps included. 100% Made in USA.