Main Menu

70 S/E Challenger rear window

Started by rftroy, July 20, 2019, 09:26:40 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

rftroy

 I have a rear window and fiberglass plug with the internal plastic molding for a 70 S/E Challenger, as shown in pictures.
The window and plug are in good shape. The inside molding is a bit wavy has one crack in it, it seems very rough textured on the outside. It almost looks like adhesive residue. I don't know what these were supposed to be originally, whether they were smooth or textured.  I also have the rear window exterior molding, which is not shown in the pictures.

Robert
70 Challenger. On rotisserie. 505, Six Pack, 5SR A-855 5-speed, 3.55, B7 blue;
AAR, 4-speed, 3.91, Tor-Red;
70 440 6 pack Roadrunner, 4-speed, 3.54, Plum Crazy;
68 Formula S conv, 383, 4-speed, 3.23, Electric Blue;
69 Barracuda conv, Slant 6, OD4, 2.94, 71 B5 blue;
78 Lil' Red Truck, Red

RUNCHARGER

The texture is no big deal as you contact cement headliner material to it. The glass and trim is a bit hard to find so the whole setup is worth a few dollars.
Sheldon

1 Wild R/T

Originally the inner trim had suede material with a foam backing glued to it....  Warped is typical, I've seen the outer trim alone sell for $200 but I've never seen a complete assembly sell for more than $300... So your best bet IMO is to sell it in pieces... Inner trim is harder to find than the window, yours is tinted which is a plus....