normal_post in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else Author Topic: Challenger T/A hood mold  (Read 302 times)

Offline three two barrels

  • Trade Count: (0)
  • Leaning Tower of Power
  • *
  • Location: wild rose country
  • index in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
  • Posts: 78
  • Credits: 760
    • Share Post
clip in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
Challenger T/A hood mold
« on: March 25, 2020, 10:11:32 PM »
Seller has the mold used to reproduce fiberglass Challenger T/A hoods, hopefully someone buys it and continues to reproduce these awesome hoods.
Seller also selling the mold to reproduce the AAR's hood,
eBay auction: #254544882840 

Linkback: https://forum.e-bodies.org/e-body-stuff-found-on-ebay-craigslist-or-anywhere-else/20/challenger-ta-hood-mold/15406/

Online GrandpaKevin

  • Trade Count: (0)
  • Big Block
  • ***
  • Posts: 453
  • Credits: 4190
    • Share Post
xx in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
Re: Challenger T/A hood mold
« Reply #1 on: March 26, 2020, 04:31:41 AM »
ASC&P made the best repop T/A hoods available.

I was going to buy one years ago but never had the time to go pick it up.

I saw a used one for sale at the NATs last year for $1800.

I hope somebody buys the molds and starts making the hoods again.

Offline 70 Challenger Lover

  • Trade Count: (1)
  • Six Pack
  • ****
  • Location: Fillmore California
  • index in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
  • Posts: 1812
  • Credits: 2240
    • Share Post
xx in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
Re: Challenger T/A hood mold
« Reply #2 on: March 26, 2020, 06:26:48 AM »

E-Bodies Cuda Challenger Message Forum

xx in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
Re: Challenger T/A hood mold
« Reply #2 on: March 26, 2020, 06:26:48 AM »

Offline HEMICUDA

  • Trade Count: (5)
  • Big Block
  • ***
  • Location: B/E & A Restoration Parts, Inc.
  • index in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
  • Posts: 854
  • Credits: 2320
    • Share Post
xx in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
Re: Challenger T/A hood mold
« Reply #3 on: March 26, 2020, 06:48:19 AM »
This company looks like they offer good products. Has anyone tried them out?

https://www.aarqualityfiberglass.com/products/hood-cuda-1970-1974-aar-bolt

https://www.aarqualityfiberglass.com/products/hood-challenger-1970-1974-ta-bolt

The only problem with their hoods is they are way to perfect and smooth.  If they made them like they were chiseled out of hand layed fiberglass sitting around a camp fire drinking beers then they would be perfect.  At one time, they absolutely had the best shaker bubble made, haven't got one from them in years.

Online dodj

  • Trade Count: (1)
  • Six Pack
  • ****
  • Location: Thunder Bay
  • index in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
  • Posts: 1810
  • Credits: 9530
    • Share Post
xx in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
Re: Challenger T/A hood mold
« Reply #4 on: March 26, 2020, 09:45:03 AM »
This company looks like they offer good products. Has anyone tried them out?

https://www.aarqualityfiberglass.com/products/hood-cuda-1970-1974-aar-bolt

https://www.aarqualityfiberglass.com/products/hood-challenger-1970-1974-ta-bolt
I had always heard they are the best. Not necessarily from a concours restoration point of view, but a quality piece.
"Some guys think that having a better car makes them better than other guys, and those guys are right." -Top Gear

Online Katfish

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Melbourne, FL
  • index in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
  • Posts: 779
  • Credits: 2350
    • Share Post
xx in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
Re: Challenger T/A hood mold
« Reply #5 on: March 26, 2020, 12:13:43 PM »
I got a T/A hood from AAR before they sold to Stinger.  I live 30 minutes from them and owner even painted it with a textured surface, not organisol, but close.
Hood is absolutely perfect, as mentioned the underside is nicer that most vendors topside.
Other issue is they mold there logo near the latch area.
None of the above is an issue for me, but a purist wouldn’t approve.

E-Bodies Cuda Challenger Message Forum

xx in Challenger T/A hood mold in E-Body stuff found on Ebay, Craigslist or anywhere else
Re: Challenger T/A hood mold
« Reply #5 on: March 26, 2020, 12:13:43 PM »


Share via delicious Share via digg Share via facebook Share via linkedin Share via pinterest Share via reddit Share via stumble Share via tumblr Share via twitter Share via whatsapp

xx
70 vs 71 Challenger Hood

Started by GoMangoBoys

4 Replies
286 Views
Last post October 02, 2019, 12:50:32 AM
by JS23U
xx
Hood Pins on a 72+ Challenger

Started by dave73

6 Replies
362 Views
Last post June 07, 2019, 07:09:44 AM
by 318Stroker
xx
70 Challenger 340 flat hood?

Started by RJChallenger

10 Replies
623 Views
Last post June 07, 2018, 06:48:11 PM
by anlauto
xx
73 challenger flat hood

Started by dave73

3 Replies
313 Views
Last post July 30, 2018, 05:38:13 PM
by YellowThumper
xx
73 Challenger flat hood

Started by dave73

3 Replies
366 Views
Last post April 18, 2018, 09:13:07 PM
by jimynick