normal_post in 70 Challenger vapor hose guard in Engine, Transmission & Rear End Author Topic: 70 Challenger vapor hose guard  (Read 500 times)

Offline Mopar5

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Bay Area California
  • Posts: 478
  • Credits: 3160
    • Share Post
clip in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
70 Challenger vapor hose guard
« on: August 01, 2020, 12:50:14 PM »
Hello Iím hoping to find someone who has a photo of how the guard attaches under the right quarter.Thanks in advance

Linkback: https://forum.e-bodies.org/engine-transmission-and-rear-end/4/70-challenger-vapor-hose-guard/17604/

Offline floorit426

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Los Gatos, Ca.
  • Posts: 350
  • Credits: 3390
    • Share Post
clip in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #1 on: August 01, 2020, 04:29:28 PM »
I dug around, but this is the best I can do. The narrower piece passes through the rear subframe and is fastened to the larger piece, with a sheetmetal screw. I just did this, on my cuda, and it's pretty straightforward. I'd take a couple of pics, but it really is hard to see, with the muffler in place. I'm sure some members have better pictures.

Offline Mopar5

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Bay Area California
  • Posts: 478
  • Credits: 3160
    • Share Post
xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #2 on: August 01, 2020, 05:25:55 PM »
Thank you very helpful, So the larger part screws into the flange at the bottom of the wheel house?

E-Bodies Cuda Challenger Message Forum

xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #2 on: August 01, 2020, 05:25:55 PM »

Offline floorit426

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Los Gatos, Ca.
  • Posts: 350
  • Credits: 3390
    • Share Post
xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #3 on: August 01, 2020, 08:17:44 PM »
Yep!

Offline Mopar5

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Bay Area California
  • Posts: 478
  • Credits: 3160
    • Share Post
xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #4 on: August 02, 2020, 08:45:38 AM »
Thanks again ,Very much appreciated.

Offline 70vert

  • Trade Count: (0)
  • Leaning Tower of Power
  • *
  • Location: Houston
  • Posts: 45
  • Credits: 440
    • Share Post
xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #5 on: August 03, 2020, 10:11:44 AM »
hmm, I'm not familiar with this set up. I've got nothing like it on my '70. I know some engines have a fuel-vapor separator with a return line back to the gas tank, and of course there is a metal vapor line from the filler hole that dumps down to the frame rail. But what are these 5 lines?

Offline Claudia

  • Trade Count: (2)
  • Big Block
  • ***
  • Location: Ohio
  • index in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
  • Posts: 597
  • Credits: 3270
    • Share Post
clip in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #6 on: August 03, 2020, 01:50:04 PM »
Here are some additional pictures (from a Cuda) if needed.

E-Bodies Cuda Challenger Message Forum

clip in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #6 on: August 03, 2020, 01:50:04 PM »

Offline floorit426

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Los Gatos, Ca.
  • Posts: 350
  • Credits: 3390
    • Share Post
xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #7 on: August 03, 2020, 05:58:08 PM »
hmm, I'm not familiar with this set up. I've got nothing like it on my '70. I know some engines have a fuel-vapor separator with a return line back to the gas tank, and of course there is a metal vapor line from the filler hole that dumps down to the frame rail. But what are these 5 lines?


It's called an ECS system, standard on all California-sold cars, in 1970. In '71, it was standard on all cars, I think. I believe the fender tag code, is N95.

Offline Mopar5

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Bay Area California
  • Posts: 478
  • Credits: 3160
    • Share Post
xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #8 on: August 04, 2020, 02:45:23 PM »
Thanks again  :cheers:

Offline Mopar5

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Bay Area California
  • Posts: 478
  • Credits: 3160
    • Share Post
clip in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #9 on: August 04, 2020, 05:51:55 PM »
 Installed

Offline floorit426

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Los Gatos, Ca.
  • Posts: 350
  • Credits: 3390
    • Share Post
xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #10 on: August 04, 2020, 06:35:52 PM »
  :ohyeah:
Looks good

E-Bodies Cuda Challenger Message Forum

xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #10 on: August 04, 2020, 06:35:52 PM »

Offline Mopar5

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Bay Area California
  • Posts: 478
  • Credits: 3160
    • Share Post
xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #11 on: August 04, 2020, 07:37:24 PM »
Thanks one more little part of the puzzle done.

E-Bodies Cuda Challenger Message Forum

xx in 70 Challenger vapor hose guard in Engine, Transmission & Rear End
Re: 70 Challenger vapor hose guard
« Reply #11 on: August 04, 2020, 07:37:24 PM »

Tags:

Share via delicious Share via digg Share via facebook Share via linkedin Share via pinterest Share via reddit Share via stumble Share via tumblr Share via twitter Share via whatsapp

clip
NOS 70 challenger front bumper guard rubber strips.. [2]

Started by ph23vo

1 Replies
509 Views
Last post December 30, 2019, 12:57:23 PM
by JS29
clip
1970-71 Cuda Challenger 340 Shaker Upper Rad Hose

Started by Chryco

3 Replies
431 Views
Last post April 12, 2019, 12:15:23 PM
by anlauto
xx
Upper radiator hose for 70 Challenger 440 sixpack with shaker

Started by ksierens

1 Replies
219 Views
Last post January 11, 2019, 12:23:21 PM
by anlauto
xx
70 Challenger windshield washer bottle motor rubber hose attachment?

Started by Rutro

4 Replies
307 Views
Last post January 01, 2020, 06:42:39 AM
by Floyd
clip
NOS 1970-71 Cuda Challenger Power Steering Hose Factory Chrysler 2891227

Started by Moparply

0 Replies
678 Views
Last post November 13, 2017, 10:21:31 AM
by Moparply