71 cuda with Alterktion front suspension

[JohnP]

I Have a 1971 Plymouth Barracuda with a 6.1 Hemi and require wheel alignment specifications. I have been restoring the car front end panels including the fire wall and all fenders internal and external, 6 months. I have Alterktion front suspension and require wheel alignment specs for this set up. I seem to be hitting a brick wall trying to get these settings and wondered if anyone had suggestions.

Cheers
John

[GCragtop]

Alignment Settings
Camber: Negative 0.5 degrees left and right side
Caster: POWER STEERING - Positive 4.5 degrees left and positive 5.0 degrees right
MANUAL STEERING – Positive 3.0 degrees left and positive 3.5 degrees right.
Toe-in: 1/16" total toe-in = 0.14 degrees = 0.07 degrees per wheel

[392 Cuda]

How did you get that shaker on there?

I plan to add a shaker to my 392 before paint. So far the plan is to find the bracket and base plate from a modern Challenger and bolt on a 70's-style bubble.

[Convertcuda]

Could you share with use how you mounted the bubble to hood? What clearance do you have left?

Ken