Main Menu

Door glass removal process

Started by Jocigar, October 14, 2021, 02:38:43 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Jocigar

Hi all,

So I've removed door glass from there doors this month and about to remove my 4th.

I try and go about it systematically each time to establish a procedure but It always turns out to be a ' remove as many screw as it takes to get it out ' and the system goes out the door. 

I read manual and it says loosen rear rail and something else, I wonder if you guys have a simple process down?

So far maybe I have this:

-remove large bumper at bottom of door
-lower window all the way and remove all screws on top: frame rails and guide whiskers
-remove lower guide rail bolts.
-remove horizontal channel bar bolts attached to glass
-slide glass up and off tracks; 1st slip front of glass out of track then slide glass forward until rear glass-bracket slips through door frame opening to completely remove glass.

Am I getting close?   :bricks:

anlauto

I haven't figure out the "easy" way in 35 years of trying... :drunk:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration