Main Menu

HELP vent cable

Started by pink aar, March 28, 2018, 03:42:20 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

pink aar

I need some help here. I'm trying to route my driver side vent cable, but its going to hit my clutch spring. The vent is out of my 70 cuda parts car. Now I bought the 4 speed clutch assembly, is it correct or not?????? I posted a few pictures of the cables now and in the parts car. Thanks again everyone.

anlauto

#1
Yes that cable location is correct :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

pink aar

Alan , how do I route the the vent cable then??? It will hit the spring??


fc7cuda

The vent cable goes over the top of the pedal bracket.  It's tight, but there is enough room.  :alan2cents:

73chalngr

I just remove the dash for my 73 challenger and my heater control cables ran in that location but the vent cable ran above that same part but closer to the firewall more directly above the brake pedal which looks like to me it would be a better angle and keep it away from that spring