1972 Cuda parts for sale

[Mickm]

Hello all,
I have just completed installing a Hotchkis TVS system in my '72 Cuda. The entire suspension had just been restored prior to my purchasing it so there is only about 300 miles on all the removed components at this point. Every has new poly bushing installed or still in the bag new.
I will add that everything worked perfectly before it was removed. I feel sorta dumb removing perfectly working parts but I wanted to go Pro Touring.
Here's what I have:
Front:
Upper Control arms
Disc Brakes-knuckles, disc, pads, dust shields,bearings, flex lines, hard lines etc.
complete sway bar-mounting brackets and everything to completely install
Torsion bars, clips, boots
Shocks (2)
Strut rods
Tie rod ends
Master cylinder
Booster with under dash linkage
proportioning valve with ss brake lines
stainless front brake lines

Rear:
Sway Bar assembly -complete
spring pack
shackles
Drum Brakes-completed with backing plates, drums and all internals
set of large axle studs (new in bag)
Shocks (4) two are new Bilsteins still in the boxes

Misc.
22"Radiator-new aftermarket with fan shroud
5 blade hard fan with spacer

Wheels:about 300 miles on them
2-Ridler 365 Chrome 17"x7"
2-Ridler 365 Chrome 17"x8"

Tires:
2-Falken FK452 234/45r17
2-Flaken FK452 255/45r17

I would  like to sell everything as a package if I can. I  can supply pictures for anyone interested.(I'll need to pull everything out of their boxes)
I also have quite a few misc. items that will be included with the deal at no additional cost.

Price for everything $2000
Price without wheel/tires $1500

Cheers!
Mickm

[Cuda Cody]

Do you have any photos?  Photos help people a lot.  Plus it sounds like you have some nice stuff that people will want.

[Mickm]

Hi Cody,
I'll get out in the shop and take some pictures and post them.
This is not rusty parts these are all ready to be bolted on. I would think this would be a great deal for anyone building a car back stock.
I priced everything thru the Classic Industries Catalog and it totaled almost $4000 for just the parts.
The wheels/tires  would cost $1500, so this is about a $5500 deal for $2000.

Thanks for the advice,
Mickm

[Mickm]

Update: Everything has been sold except the radiator, fan and spacer.
Here are a couple photos.


Radiator is 22" aftermarket. It has been used for about 300 miles. Has transmission cool in lower tank, perfect fan shroud and pressure cap.


The fan shroud is original and has the Mopar Star with the  numbers 3462139 above and below24654.

The spacer is 2 3/8" and comes with mounting hardware.

Price for both from Classic Industries (where purchased) was over $550 (minus, cap and spacer)

I'm asking $300 for everything.

Cheers!
Mickm