Challenger Parts

[Mr Mopar Tennessee]

Getting ready to move, so I started doing a final clean out above my garage. I started thinking it would be kinda tough to move my collection of Challenger body parts, so I thought I might try to sell a few things. I was just introduced to the webmaster of this fine domain through a mutual friend and he suggested posting it here.

There is an original driver side Challenger fender. I replaced it being a perfectionist with an AMD fender. It would have been much cheaper to keep it on the car because it just needed a skim coat to cover the elbow marks. I also have a Challenger passenger side door. It had a dent so I had it reskinned about 4 years ago. Cost me $500. Then I found another perfect, original door here in Boise, Idaho which I decide to use.

Next is a very clean Challenger bulge hood. It was on my convertible, and right before it was about to painted I decided I wanted a shaker hood. $3500 later and the shaker is installed :-)

The hood is excellent except one small dent. The hood blew over in my garage.

I also have an excellent AMD rear deck lid.

I also have the original back glass from my Challenger convertible before I replaced the top.

I always felt it was important to have spare body panels in case I had an accident.

The hood is worth $700 (at least), door $250, fender $250, deck lid $100. If someone can pick it up in Boise, Idaho by November 5th, they can have it all for $900, glass included. If someone wants just a piece or two let me know and we'll figure out a good price.

Thanks,
Jeff

[1 Wild R/T]

Wish I was closer, nice original metal is getting harder to find....And I too like having extra metal around since I drive my convertible allot..... Good luck with selling your parts & welcome to the site....

[kawahonda]

I'm in Boise and interested in the deck lid.

AMD makes a regular quality and a restorers choice, or something like that. Do you know which quality yours is? Only interested in the higher quality. I'd like to see pics too. With or without spoiler holes?

Here's regular quality: https://www.classicindustries.com/product/all-years/dodge/challenger/parts/mm1242a.html

Here's "Restorer's Choice" quality: https://www.classicindustries.com/product/all-years/dodge/challenger/parts/mm1242b.html

[Mr Mopar Tennessee]

Wanted to let anybody know, that I sold/got rid of everything except the passenger Challenger door. It's located in Boise, Idaho. The price is $250.

Thanks,
Jeff

[Katfish]

I'm in Boise and interested in the deck lid.

AMD makes a regular quality and a restorers choice, or something like that. Do you know which quality yours is? Only interested in the higher quality. I'd like to see pics too. With or without spoiler holes?

Here's regular quality: https://www.classicindustries.com/product/all-years/dodge/challenger/parts/mm1242a.html

Here's "Restorer's Choice" quality: https://www.classicindustries.com/product/all-years/dodge/challenger/parts/mm1242b.html

Interesting,  but I'm pretty sure the cheaper is probable Goodmark or another vendor and not AMD.

[kawahonda]

You're correct. AMD only makes the higher cost version. Cheaper one is anyone's guess.