Mopar LA EFI Parts

[Dmod1974]

These all came off of my old 408 stroker build.  I'm installing a Hellcrate engine after the resto and need to free up some cash and garage space.  Everything worked perfectly on that engine.  I'm located in the Chicagoland area and am willing to ship if buyer pays.  I can do Paypal, Venmo, Zelle, or cash for payments.  Any questions, lemme know!

Cam (CMP) Sensor and adapter - $100
This includes a Jeep CMP sensor and connector pigtail with a billet aluminum adapter to allow you to completely ditch the distributor and run coil packs and sequential EFI.  The sensor is a half moon on/off Hall effect sensor.



LS2 Truck Coil Kit - $400
Comes with baffled MP aluminum valve covers, 8 OEM LS2 truck coils, coil harnesses, male pigtails, reusable rubber/steel core gaskets, stud kit, breather, and MSD plug wires.  Can be run in wasted spark OR sequential mode.  Valve covers are clearanced for aluminum high rise intakes and could use fresh paint.





Edelbrock Super Victor EFI 28155 Intake Manifold - $1,200
Comes with 42 lb/hr Venom injectors, 4bbl 4150 throttle body w/PWM IAC, throttle linkage bracket, rails w/ custom welded 6AN ports, AFPR, return lines, 2 sets of Felpro 1213 intake gaskets, fuel Y block, 12pt SS intake bolts, thermostat housing, 180F thermostat, drop base air cleaner with IAT sensor bung, IAC block off plate, IAC/TPS connector pigtails, heater/bypass hose fittings, and a bunch of throttle body/thermostat housing gaskets.

[Dmod1974]

2 Wideband Knock Sensor Adapters - $75
Includes Bosch wideband sensors, pigtails, and adapters to install wideband knock sensors low and in the middle of the block by using the coolant drain ports.  It's really important to mount knock sensors low enough to avoid false knock detection from the exhaust or valve train.

[Dmod1974]

$800 - Megasquirt MS3X standalone EFI box with dual knock sense module and JS4 input wired up (1 pin Weatherpack connector in pic). Comes with IAT and ECT sensors, assembled 8ft wiring harness that is color coded and labelled, ECT/IAT sensors w/ pigtails, 2 100psi pressure sensors for fuel, oil pressure, etc. with pigtails, 36-1 trigger wheel, and long USB tuning cable.

The harness has 2 35 pin Ampseal connectors to make a nice and weathertight bulkhead going through the firewall.

Comes with tons of spare semiconductors, Ampseal connectors/headers/pins, and DB37 connectors. I also have connector pinout lists with circuit description and color to make it easier to wire.













https://i.imgur.com/pxFpmd6.jpg[/img]

[Dmod1974]

2 Innovate Motorsports LC1 Wideband O2 Sensor Controllers w/ sensors - $100
Includes 3 working sensors