Parts Going to Carlisle

[Floyd]

Getting things put aside for Carlisle and thought I'd pre-list some stuff here.  Vendor space G-123/124 (right outside Bldg T).  Additional pics on request.   

Original 1970 "Go Wing" Spoiler – Measures 58" overall and 36" between the pedestals.  No cracks or damage.  Several minor imperfections in the paint.  $375 SOLD


E/B-Body Power Steering Box – Casting number 2267282, "SMALL shaft/sector" - 1 1/8", dated 24 Oct 1969.  $125 SOLD


Restored E-Body Woodgrain Steering Wheel – Very nice complete woodgrain steering wheel professionally restored by Jerome Verbit approximately 15 years ago.  Excellent horn pad and switch.  Wheel has never been used.  $450

1970-1971 Bucket Seat – A/B/E-Body – Includes D/S seat latch and associated hardware (hinge bolts, etc).  NO TRACKS OR HINGE COVERS.  $125 SOLD

1970-1971 Bucket Seat Bottom Frame – A/B/E-Body – Cleaned and painted.  No cracks or broken welds and only light pitting in some areas.  $75 SOLD

Complete Set of New SS Brake Lines - 70-71 Challenger – Unused stainless steel brake lines from Fine Lines/SS Tube for a 70-71 Challenger with PDB and 426 Hemi.  The only hemi-specific part in this kit is the set of lines that connect the M/C to the proportioning valve.  All other lines will work on any 70-71 Challenger with PDB and the long 1-piece front to rear line.  I bought these years ago at the Mopar Nats and the long line was never bent for shipping.  $100 (about half the cost of current retail)

1971-74 Cuda Headliner Bows – Original 4-bow set in nice shape.  $50. SOLD

NOS 1971 Challenger R/T Stripe Kit - Complete set of black R/T stripes (Fenders, doors, and 1/4s).  Stripes are in excellent condition with no signs of moisture damage.  $250. SOLD

2 X 1970 E-Body 4-Speed Consoles - Two complete consoles with top plates.  One black, one burnt orange.  Black console has some cracks in the glove box well.  Burnt orange one has no cracks.  $400-600 SOLD



Thanks for the ad!

[Floyd]

Updated to add a couple items.

[Cuda_mark]

@Floyd Hi - is there any way to verify that the 70 wing is an original part?

[Floyd]

@Cuda_mark - The hollow pedestals with Chrysler part number indicates it's original.  Let me know if you want additional pics.

[Cuda_mark]

@Floyd Thanks for the picture. If you have any pics of the imperfections, that would be good. I'm going to Carlisle so I could meet you there.

[Floyd]

@Cuda_mark  Just some slight chips in the paint along the trailing edge and a couple other spots. A couple other areas with minor imperfections in the finish.   None of these flaws affected the plastic and there are no cracks.   The paint chipping will be very easy to touch up if you don't want respray it.  The finish feels like a very fine grain organasol to me. 

[anlauto]

That's a really good deal on a wing, you should have no problem moving that at Carlisle....same with the four speed console, I sure wish I was going to the show...

[Floyd]

Updated following Carlisle.