1970 Original Anco Black Button Wiper Holders

[schlett7nu1]

Want to buy pair of original Anco black button wiper blade holders for my 70 Challenger.

[Jay Bee]

Listed today on Moparts.

https://board.moparts.org/ubbthreads/ubbthreads.php/topics/3000857/15.html

[cudaize]

The hard part to find here is the center section with the small round plastic release button to put on the arm. I'm not sure if these were ever available as replacements or only assembly line.  Based on what I have seen others ask for the ones with metal tangs I would say these are reasonably priced.  The only other thing to make sure of is if the refills are turtle backs and I think the refills have date codes as well, has been a couple years since I put the wipers on my Cuda.

Mike Afflerbach

[anlauto]

You can get new ones for $50 bucks....hardly worth messin' with old ones
https://www.classicindustries.com/product/1970/dodge/challenger/parts/me7601.html

[cudaize]

You can get new ones for $50 bucks....hardly worth messin' with old ones
https://www.classicindustries.com/product/1970/dodge/challenger/parts/me7601.html

These are patterned after the replacement style with the metal button for release from the arm.  Assuming the quality of these are acceptable they would probably be acceptable for 99-99.5 of the folks doing restorations.  The production line style ones are only for the super critical OE resto crowd. 

[anlauto]

That's true for 99.9% of the restoration parts available