Ebody 4 speed parts wanted

[Todd489]

Looking for 4 speed parts for 70 challenger 383, I'm converting over to manual , I know it's a shot in the dark, but never know, I am getting a trans from passon though,  what ever else is out there let me know.

[soundcontrol]

Check e-bay also, I just found a restored pistol grip shifter with all the connecting rods. From this guy, he seems to have a lot of 4-speed stuff. Good guy to deal with.
https://www.ebay.com/sch/rwr1966/m.html?_nkw=&_armrs=1&_ipg=&_from=

And I found all the pedals and support earlier, just missing the bellhousing and the flywheel and clutch now.

[anlauto]

Brewers will have everything you need

[fantum]

Don't forget the bracket that sits on the frame rail and supports the end of the rotational bar that depresses the clutch when you step on the clutch pedal.

[ply64post]

If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff         

[anlauto]

If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff         

Depending on how correct his car is, I believe he would only need to swap out the tranny bracket and one rod the goes to the transmission for the reverse lockout. 

I'm looking for anybody that might have the reproduction 70 reverse lock-out set up in stock ready to ship.

[Jim AAR]

If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff         

Depending on how correct his car is, I believe he would only need to swap out the tranny bracket and one rod the goes to the transmission for the reverse lockout. 

I'm looking for anybody that might have the reproduction 70 reverse lock-out set up in stock ready to ship.

https://www.ebay.com/itm/202014257969/?vectorid=229466&item=202014257969%2F&rmvSB=true

Here as well: https://www.jimsautoparts.com/transmission_parts.htm

[anlauto]

If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff         

Depending on how correct his car is, I believe he would only need to swap out the tranny bracket and one rod the goes to the transmission for the reverse lockout. 

I'm looking for anybody that might have the reproduction 70 reverse lock-out set up in stock ready to ship.

https://www.ebay.com/itm/202014257969/?vectorid=229466&item=202014257969%2F&rmvSB=true

Here as well: https://www.jimsautoparts.com/transmission_parts.htm

Thanks Jim 

The Ebay one looks like an original one restored which I might have to go with....Jim's Auto is most likely out of stock like everybody else, but I'll try sending an email.

[soundcontrol]

If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff         

What is that, what s the function? Something I need on a modified -73?

[anlauto]

If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff         

What is that, what s the function? Something I need on a modified -73?

No...it's a 1970 only thing. In order to remove the key from the ignition the car has to be in reverse(4spd car) or park(auto car). In 1971 + the switched to a column lock with the "to remove key" lever.

[Jim AAR]

If you are going to make it correct for 70 you will also need the reverse lockout linkage also.

                                                  Jeff         

Depending on how correct his car is, I believe he would only need to swap out the tranny bracket and one rod the goes to the transmission for the reverse lockout. 

I'm looking for anybody that might have the reproduction 70 reverse lock-out set up in stock ready to ship.

https://www.ebay.com/itm/202014257969/?vectorid=229466&item=202014257969%2F&rmvSB=true

Here as well: https://www.jimsautoparts.com/transmission_parts.htm

Thanks Jim 

The Ebay one looks like an original one restored which I might have to go with....Jim's Auto is most likely out of stock like everybody else, but I'll try sending an email.

No problem, I like the one on E-Bay as well, he did a nice job of restoring it. He says its all original parts except for the Bushings, Washers & Clips.

I was looking for the just the Rods (I have everything else) awhile back and came across the Jim`s Auto one, but I didn`t inquire if he had it in stock.

[Chryco Psycho]

https://www.ebay.com/itm/PG-Classic-241-Mopar-1970-74-E-Body-1971-74-B-Body-4-Speed-CLUTCH-Pedal-KIT/372127935663?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649
Pedal set up new