Fender Cover or Gripper to protect paint?

[chaps70rt]

Have any of you found a decent fender cover that protects the paint properly like the Holley Gripper pad?

Having a problem with putting a Chevrolet banner over the Challenger Fender.  LOL.

Let me know if any of you have discovered a new solution for this age old problem.

Thanks ....



Linkback: https://forum.e-bodies.org/tools-and-equipment/22/fender-cover-or-gripper-to-protect-paint/19487/

[JS29]

One thing I do is I ware my belt buckle off to the side.

[1 Wild R/T]

Try putting this under your fender cover....

https://www.amazon.com/HOME-GENIE-Original-Adhesive-Cabinets/dp/B07ZDH8XG3/ref=sr_1_1_sspa?dchild=1&keywords=rubber+shelf+liner&qid=1608847321&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyTjlNUkxTMTVQRzgyJmVuY3J5cHRlZElkPUEwMzQzNzE4MjdJNTBBQjRKTTdONSZlbmNyeXB0ZWRBZElkPUExMDMyOTMwMTFCNlZMWkpIV1NXMiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

[Brads70]

 

https://www.classicindustries.com/shop/all-years/plymouth/all-models/parts/car-care/fender-covers/

[1 Wild R/T]

Thing is regular fender covers always slip & slide, they fall off, thats why guys often don't use them.... Put the grippy shelf liner down first & the fender cover won't move...

[Topcat]

What about trying to glue flat magnets on the edges?

[chaps70rt]

Found the correct solution for Mopar ........... Amazon!!

https://www.amazon.ca/Fender-Gripper-FG2203-Mopar-Cover/dp/B00XQEJ558/ref=sr_1_3?dchild=1&keywords=Holley+fender+gripper&qid=1608904657&s=automotive&sr=1-3

[mopar jack]

I use three fender covers when working under the hood, one on each fender and one on the front header. I also keep one in the trunk along with some tyvex coveralls for road side work. I like the Moon equipped covers and they don't slip. https://www.mooneyesusa.com/MOONEYES-Fender-Cover-p/mp011.htm

[RSI700VIPER]

I've been using assorted old beach towels and snow man cotton blankets but recently I bought a gripper fender cover.  It has a nice Hurst logo, is soft and doesn't slip plus it looks like it belongs in a garage.  Unfortunately I don't have a picture handy of the gripper. 

[cudaragtop]

I have one of Bob's Original Fender Covers
It's awesome.
I have a few other Mopar regular fender covers too. Can use them on top or alone if it's a quick job.
If I'm going to be in there for long, I like the full coverage with Bob's

https://bobsoriginalfendercovers.com/

Here it is on my Challenger


Here are a few pictures from the website