Driver side brake line clip or clamp style

[440ehigh]

Is there any one correct type of brake line holder on the driver side brake line on the rear subframe by the sway bar bracket. Was it whatever type that was available that day when it was going down assembly line or is it supposed to be a specific one. I've seen pictures of it with the clip style and seen them with the clamp style. I'm working on a 71 if that makes a difference. Then adding pictures of the exact area I'm talking about.

[benguin]

Hopefully we can get a good representation of responses and see if the difference is build plant, build date, or both.

My 1970 'cuda is a Hamtramck build in 11/69 - I've got the clips.
   Ben

[anlauto]

I've only ever seen clips in that location 

[440ehigh]

Ok sounds good most the pictures I've seen have been clips so just wanted to check since I've seen a few with the clamps

[DeathProofCuda]

My 70 Cuda was built at Hamtramck in 9/69 - I've got clamps at both locations, like shown in the first pic in this thread.

[headejm]

1970 Hamtramck Challenger SPD 508. Driver's side clip type up high, clamp type lower. Passenger side clamp type up high.