Front disc seal

[A.Gramz]

So the originals are long lost.   The ones I ordered have a skirt on it which i assume it goes towards the spindle but if I install it that way it will be rubbing on the dust Sheild foam gasket.   Do I need to cut back the gasket (see pic ). Or do I have the wrong seal?    Thx guys I'm just not used to not sealed wheel hubs lol.

[Chryco Psycho]

That is the correct way to install it , you may have to trim the foam

[A.Gramz]

Ok perfect thanks.  Didn't want to just go trimming