Main Menu

Kelsey Hayes Brake Pins

Started by Topcat, November 19, 2018, 06:18:05 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Topcat

I know I can get these.

https://www.ebay.com/itm/E-And-B-Body-Mopar-Disc-Brake-Caliper-Pins-Cuda-Challenger/253738888100?hash=item3b14042ba4:g:ogYAAOSwDzFbR1ry

That isn't what I want to get.

I want to know is there anyone here; or you know, that can make something similar to them.

It could have potential to go to market.

Topcat

O.K.

So what I have is a very rare replacement kit upgrade for the Kelsey Hayes Calipers.

Yes: An OEM Mopar Kit.


What it includes:

4 Caliper pins that are shorter than what the original OEM one's were.

These pins eliminated the rattle clips.

The instructions that came with it state: Must use disc brake pads that have a slot down the middle of them.
The reason is to eliminate dust build up, squealing, vibration, etc.

Must've been the reason for the anti rattle clips?

Sounds interesting?

Cuda Cody

I've not see anything like it before.  This was an original OEM item?


Topcat

Quote from: Cuda Cody on December 16, 2018, 02:58:51 PM
I've not see anything like it before.  This was an original OEM item?

It was a replacement pin kit from Ma Mopar offered probably in the late 70's.
I  bought it when I worked at a Dodge dealership.

The bolt head goes up tight to the Caliper.