Main Menu

KH80012 Help!

Started by 70_440-6Cuda, May 09, 2023, 05:25:14 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

70_440-6Cuda

Hey all, since I have a Wilwood conversion on my car I have nothing to compare to, but from what I can research the original disc brake set up for a '70 E body is caliper mounted on the front side of the disc with the bleeder nipple in board and at the top as in the first photo, correct?

If that is in fact correct, then the caliper on the left in the second photo is a driver side caliper (KH 78933 and incorrect for my application).

Just trying to make sure I hunt down the correct side I need - thanks
You can't buy happiness, but you can buy horsepower and that's kind of the same thing.....

Chryco Psycho

Yes front mounted with the bleed screw inside & on top otherwise  the air cannot get out

70_440-6Cuda

You can't buy happiness, but you can buy horsepower and that's kind of the same thing.....


68bee

KH 78933 caliper should be for a 69 - 73 C body