Lower control arm brackets for front sway bar

[whitsend]

Good afternoon Gents,

I'm looking for some measurements for the bracket that the front sway bar bolts to on the lower control arm. If someone cane get the dimensions and hole size and location, that would be awesome. I'd like to make my own rather than buy them. I have the materials and want to give it a try. Thanks! 

[Brads70]

 

[Brads70]

Easy enough to make if you ok with " not correct"
I made my own 10-12 years ago, still working fine.
Note these are A-Body lowers ( I built a custom set up...)

[Mr Cuda]

@Brads70  Did you use A body lowers just to bring the shock in a bit?
Other than that, they are the same as far as I know.

[Brads70]

@Brads70  Did you use A body lowers just to bring the shock in a bit?
Other than that, they are the same as far as I know.

Hi, No I used them because they are 3/16" ( I think, it's been 10 plus years now?) longer to get the camber I wanted when I used the 73 C-Body spindles.
Here is a post on what I did if your interested....
https://forum.e-bodies.org/wheels-tires-brakes-suspension-and-steering/12/-using-c-body-spindles-on-an-e-body-and-a-body-lcas-and-viper-calipers/58/

[whitsend]

Thanks so much for the replies everyone. I appreciate you taking the time to help me out.