Manual Brake Master Cylinder Pushrods

[7dcuda]

On a 70 Cuda is the master cylinder pushrod the same on a manual drum master cylinder and a manual disc master cylinder?

[Chryco Psycho]

Yes it is , there is a groove at the tip of the pushrod that holds & rubber O ring that locks the pushrod into the rear of the master . You will have to replace that rubber O ring .

[7dcuda]

Ok....thanks for the reply.  I'm aware of the rubber o ring that holds the pushrod in the master ..I just wasn't sure if the pushrod was the same between the two masters......thanks again.