veryhot_post in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS) Author Topic: A.G.A.R. This just in....Week Seven  (Read 7827 times)

Offline anlauto

  • Trade Count: (12)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 16232
  • Credits: 41960
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
clip in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 5
« Reply #75 on: January 12, 2021, 08:49:47 AM »
Got the doors back from Techno-Strip today, other than a couple of dents they are nice rust-free doors :banana:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Offline soundcontrol

  • Trade Count: (0)
  • Six Pack
  • ****
  • Location: Sweden
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 1368
  • Credits: 2920
    • Share Post
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 6
« Reply #76 on: January 12, 2021, 11:24:39 AM »
Wow, thats the cleanest doors I ever seen. Dipped? You know what they used?
/Ken

1970 Challenger restomod project 6.1 Hemi
Link: https://forum.e-bodies.org/your-restoration-project/10/70-challenger-conv-restomod-6-1-hemi/337/
1973 Challenger project
2008 Challenger SRT
1970 Barracuda Gran Coupé

Offline anlauto

  • Trade Count: (12)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 16232
  • Credits: 41960
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 6
« Reply #77 on: January 12, 2021, 12:11:18 PM »
Wow, thats the cleanest doors I ever seen. Dipped? You know what they used?
I'm not sure the chemical they use, but it's well worth the money as far as saving time goes, I've been using them for years.

E-Bodies Cuda Challenger Message Forum

xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 6
« Reply #77 on: January 12, 2021, 12:11:18 PM »

Offline Jay Bee

  • Trade Count: (0)
  • Six Pack
  • ****
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 1726
  • Credits: 11330
    • Share Post
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 6
« Reply #78 on: January 12, 2021, 12:28:35 PM »
Hey Alan, another question. Would you know if their process removes bondo/body filler. My original 1970 Barracuda rear valance is filled with it and I'd like to see if it can be made useable whenever my car gets to that point.
1970 Barracuda convertible
2000 Toyota Avalon XLS

Offline anlauto

  • Trade Count: (12)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 16232
  • Credits: 41960
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
clip in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 6
« Reply #79 on: January 12, 2021, 12:40:17 PM »
Hey Alan, another question. Would you know if their process removes bondo/body filler. My original 1970 Barracuda rear valance is filled with it and I'd like to see if it can be made useable whenever my car gets to that point.

YUP 100% cleans everything right off...you might not like what you find though.... :rofl: bondo can hide a lot !

I found 17 ugly patches just like this one in the pair of fenders the customer swore were in "great" condition... :drunk:

...and this was the good side  :rubeyes:
« Last Edit: January 12, 2021, 12:55:01 PM by anlauto »

Offline anlauto

  • Trade Count: (12)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 16232
  • Credits: 41960
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
clip in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 6
« Reply #80 on: January 12, 2021, 12:50:47 PM »
Another excellent bondo hiding story (sorry Doug)

Online SRT392

  • Trade Count: (0)
  • Small Block
  • **
  • Location: Canby. Or
  • Posts: 27
  • Credits: 230
    • Share Post
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 6
« Reply #81 on: January 12, 2021, 04:34:04 PM »
Alan,  i like dipping but for the hood would it remove the adhesive they used to attach the skin to the inner frame???

E-Bodies Cuda Challenger Message Forum

xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 6
« Reply #81 on: January 12, 2021, 04:34:04 PM »

Offline anlauto

  • Trade Count: (12)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 16232
  • Credits: 41960
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....WEEK 6
« Reply #82 on: January 12, 2021, 04:47:16 PM »
Alan,  i like dipping but for the hood would it remove the adhesive they used to attach the skin to the inner frame???

Yes it would remove that as well...unfortunate, but you can replace it with carefully placed gobs or seam sealer. :alan2cents:

Offline anlauto

  • Trade Count: (12)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 16232
  • Credits: 41960
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
clip in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....BLASTED
« Reply #83 on: January 13, 2021, 01:21:25 PM »
Got the car back from the blasters today....no real surprises.... :)

This is the ONLY way to start a project :twothumbsup:

Offline 70rag383

  • Trade Count: (0)
  • Small Block
  • **
  • Location: Toronto, Ontario, Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 67
  • Credits: 640
    • Share Post
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....BLASTED
« Reply #84 on: January 13, 2021, 02:22:48 PM »
Looks to be in good shape Alan. Usual suspects with the rust in the quarters etc. but the structural components look very nice.  :ohyeah: :ohyeah:

Offline RUNCHARGER

  • Trade Count: (7)
  • E-Body Wizard
  • *****
  • Location: .Vernon B.C.
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 10475
  • Credits: 33710
    • Share Post
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....BLASTED
« Reply #85 on: January 13, 2021, 04:16:52 PM »
Huge money saver starting with a shell like that.
Sheldon

E-Bodies Cuda Challenger Message Forum

xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....BLASTED
« Reply #85 on: January 13, 2021, 04:16:52 PM »

Offline anlauto

  • Trade Count: (12)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 16232
  • Credits: 41960
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....BLASTED
« Reply #86 on: January 13, 2021, 04:41:48 PM »
Huge money saver starting with a shell like that.
Yea for sure, we're actively looking for a similar condition 70-71 Barracuda to build a resto-mod out of... :takealook:  if you know of anything even out your way...

Offline Swamp Donkey

  • Trade Count: (0)
  • Big Block
  • ***
  • Location: Baldonnel BC
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 288
  • Credits: 2700
    • Share Post
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....BLASTED
« Reply #87 on: January 13, 2021, 05:26:02 PM »
So.... is that pure bare metal? Or did they give it a quick spray of primer?


Sent from my iPhone using Tapatalk
1973 Cuda. 340 4 speed.

Offline anlauto

  • Trade Count: (12)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 16232
  • Credits: 41960
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
xx in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....BLASTED
« Reply #88 on: January 13, 2021, 05:45:38 PM »
So.... is that pure bare metal? Or did they give it a quick spray of primer?


Sent from my iPhone using Tapatalk

That's bare steel....It's at the body shop getting epoxy primed right now.... :bigthumb:

Offline anlauto

  • Trade Count: (12)
  • E-Body Wizard
  • *****
  • Location: Georgetown Ontario Canada
  • index in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
  • Posts: 16232
  • Credits: 41960
  • Life is like a box of chocolates....
    • Share Post
    • www_sm in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
clip in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....BLASTED
« Reply #89 on: January 14, 2021, 12:43:20 PM »
Lots of parts media blasted too :)

E-Bodies Cuda Challenger Message Forum

clip in A.G.A.R.  This just in....Week Seven in Your Restoration project (ROSEVILLE MOPARTS)
Re: A.G.A.R. This just in....BLASTED
« Reply #89 on: January 14, 2021, 12:43:20 PM »

Tags:

Share via delicious Share via digg Share via facebook Share via linkedin Share via pinterest Share via reddit Share via stumble Share via tumblr Share via twitter Share via whatsapp

xx
Only 1 WEEK !!!!

Started by anlauto

24 Replies
2331 Views
Last post July 08, 2019, 05:50:02 PM
by anlauto
xx
Hot Rod's Drag week 2018

Started by Brads70

23 Replies
805 Views
Last post September 20, 2018, 01:19:55 PM
by Burdar
clip
Seen some rare stuff this week.

Started by Stein

16 Replies
1195 Views
Last post October 15, 2017, 09:23:32 PM
by RUNCHARGER
xx
Here We Go! Memorial Day Week-end! Yippee!

Started by Topcat

34 Replies
1820 Views
Last post May 29, 2017, 09:15:56 AM
by J-Code Jeni
xx
Week Code Dates

Started by fc7cuda

7 Replies
730 Views
Last post January 20, 2017, 08:22:07 AM
by Cuda Cody