Main Menu

Barnfind 1970 Barracuda

Started by soundcontrol, March 07, 2020, 01:28:05 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

soundcontrol

Trying to fabricate my own Cuda exhaust tips from some stainless steel I had.
Have no metal brake so I made one out of wood.
The corner gets a bit wider radius than what I see in pictures of the originals, due to my crude wood brake,
but WTH, at no cost, they will be fine.

Thanks @usraptor for the measurements!

anlauto

Ingenious !  :worship: Bend radius looks good, once you get the angle cut into them.... from a distance, no one will know the difference  :bigthumb:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

JS29



soundcontrol

Weather has been bad, getting better now so I can get stuff done.
Exhaust tips are coming along, made them a bit longer than original just in case I screwed up the angle in the cut.
And I'll wait with welding on the pipes until I see how the system sits.
Some polishing on the stainless and they will do fine.

JS29


usraptor

Great job Soundcontrol.  :twothumbsup: :clapping: I'm jealous of our skill.  :worship:

anlauto

AWESOME....good enough for the girls I go out with  :clapping: :drinkingbud:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


cudamadd


Challenger in NC


soundcontrol

Quote from: anlauto on May 23, 2020, 02:44:15 PM
AWESOME....good enough for the girls I go out with  :clapping: :drinkingbud:

I know those girls, not that picky  :haha: :haha:

soundcontrol

Exhaust done!
That was a pain, nothing fits perfect, had to slice and cut a lot to make it fit.
Made my own hangers.
My tips came out OK with some quick polishing, too nice for the that tail panel.
They should fit the valance also, tested it many times.


usraptor


soundcontrol

Changed the tranny oil and filter in the 904, I just had to paint the pan, could not resist, very mismatched  :D

soundcontrol

Now on to the brakes. Have none.
A bleeding did it for the front system, but not the rear, suspect a blockage or a leak in the brakeline to the rear axle. Crap!

The red brake warning light, (on the dash) should that turn on if I ground the wire that goes to the brake line split block under the master cylinder?
Or is it somehow connected so I actually need to push the brake also?

soundcontrol

Yep, totally blocked hose at the rear axle, never seen that before.
Of course I broke the brake line coming in to the hose while removing, just moved it and it snapped.
I'm gonna replace all the brake lines and hoses now.