70 SE Tail panel restoration ... Trial Updated Photos

[Ed]

The trim pieces from AMD   oer and dynacorn appear exactly the same with large price difference   I did these with Dynacorn  but onen off it are AMD that came as OER .  For first try I am pretty happy.  I will do the other one soon.  I did fit it on the car before paint and it fit well

[anlauto]

So how did you attach the corner trim ?

[Brads70]

Not " correct but since the hardware is extinct I used the lock to aid in holding down the trim panel. Thought that might give someone some helpful idea's....?   

[Ed]

first I ground off any coating on the panel and on bottom of one side of trim.  I tried to use those ebay aluminum welding rods but didnt have any luck.   I ended up using proffesional JB weld I rubbed it into the pieces for a good bond then applied enough so it touched everywhere I wanted it to bond.   

[70/6chall]

Brad........these are the extinct SE/WSS rear finish panel clips you were referencing, minus 2 of the small sheet metal screws that are at the top of panel.  Thanks,   Al