AMD new vinal roof trim at trunk

[Ccuda]

Can I get some feedback before I buy the stainless trim for a Vinal top that goes below the back window. AMD doesn't list any attachment clips for some reason. My 70 Cuda didn't come with a Vinal roof so I'll have to drill also. Is their trim peace worth it and what kind of clips do you recommend?
Thanks

[truckinman466]

Roseville Moparts sells the clip kit. Depending on year they were either screwed on or had rivets welded to Dutchman panel. The clip kit will fit either way.

[Ccuda]

Thanks for the feedback. Do you know if the drip rails on the 70 Cuda are attached by screws or just pressed on like all the GM ones?

[anlauto]

The drip rails are screwed on, the weather-strip channels need to be removed, also screwed on, to get at the drip rail trim.
I recommend the vinyl top trim clips from a 70 which are studs and nuts, they hold much better.

[Ccuda]

Trim clips for a 70? That's what I asked about. Do you mean a different year? I'm going to order the ones from Rosedale for a 70 right?

[anlauto]

I prefer this kit  https://www.rosevillemoparts.com/product/vinyl-top-molding-trim-clip-kit-70-72-cuda/

[anlauto]

over this kit
https://www.rosevillemoparts.com/product/vinyl-trim-clip-set-71-74-e-body/

[anlauto]

You should be fine with the headliner to get at the drip rail moldings, but you will need to lift the bottom of the headliner on the B pillars to access the vinyl top trim nuts on the front of the trim..

[FE5CUDA]

You should be fine with the headliner to get at the drip rail moldings, but you will need to lift the bottom of the headliner on the B pillars to access the vinyl top trim nuts on the front of the trim..

Yea, that's a big negative.  You will NOT have to pull the headliner lose at the B pillar, just remove the sail panel to access the studs to install the nuts.  The headline doesn't come down any where near that far.

[anlauto]

Yes FE5CUDA is 100% correct, I thought you were working on a Challenger sorry for the total misguidance...I'm such an idiot 

With a Cuda you can just remove the sail panels

[FE5CUDA]

Yes FE5CUDA is 100% correct, I thought you were working on a Challenger sorry for the total misguidance...I'm such an idiot 

With a Cuda you can just remove the sail panels

Oh, ok. 

[JS29]

Admitting you have a problem is the first step to a cure!!! 

[anlauto]