Main Menu
avatar_ec_co

Fender tag hole location?

Started by ec_co, June 28, 2025, 08:05:07 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

ec_co

yeah yeah, I know....

I had my inner fender replaced and didn't get the measurements for the tag holes. Anyone have measurements or a diagram? I searched for a bit and didn't find anything.

Thanks!
The only thing flat earthers fear, is sphere itself.

'70 Barracuda B5/B5 225 /6 3spd ... about as bare bones as they came .... now in 4spd flavor

www.eyecandi3d.com for Reproduction Fender Tags

Jay Bee

Here's my car. The two tag holes aren't perfectly across from each other. The back one is ever so slightly tilted down (toward the fender). I didn't think the 2nd hole's distance from the front was necessary. Please, someone else chime in to confirm these measurement.

Jay Bee

Just for clarification. it's only the corner of the ruler that's touching the car so that it's perpendicular to the holes. They're both about 1 3/4. I'd put some painter's tape down, mark those hole locations with a Sharpie and line up a tag to them and see how it looks. I know the picture looks like it might be touching the vertical part of the inner fender but it's not.


mtull

Quote from: Jay Bee on June 28, 2025, 10:17:53 AMPlease, someone else chime in to confirm these measurement.
I could see the fender tag location being a 'ball park' type measurement however measuring from the radiator support may yield a more consistent result as it eliminates the fender adjustment variable.   

I have 14 3/4 between the radiator support and first fender tag screw.  The second screw hole is 17 7/8 from the radiator support.  The distance between the vertical inner fender and the screw holes is 1 9/16.  I have no idea if said measurements are different between Dodge and Plymouth or if assembly plant and year make any difference. The aforementioned measurements are from a 1970 Challenger built in Hamtramck.


Tags: