Main Menu

Question about a rear spoiler for 74

Started by 918Muscle, May 05, 2019, 08:39:35 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Brads70

Quote from: 918Muscle on May 18, 2019, 08:45:48 PM
Quote from: dave73chally on May 16, 2019, 09:50:28 AM
I'd buy a repro 70 t/a spoiler and then modify it with that center swoop-down look. At least then you know the bottom contour and length fit your car with no modifications.


I thought of this. I am just not sure if the abs 70 T/A spoiler is solid abs or has a hollow center? If solid then I would be willing to give it a try and notch the center.  :thinking:

It has a hollow center, or at least the one I have does.

918Muscle

Quote from: Brads70 on May 19, 2019, 04:04:36 AM
Quote from: 918Muscle on May 18, 2019, 08:45:48 PM
Quote from: dave73chally on May 16, 2019, 09:50:28 AM
I'd buy a repro 70 t/a spoiler and then modify it with that center swoop-down look. At least then you know the bottom contour and length fit your car with no modifications.


I thought of this. I am just not sure if the abs 70 T/A spoiler is solid abs or has a hollow center? If solid then I would be willing to give it a try and notch the center.  :thinking:

It has a hollow center, or at least the one I have does.

That's what I would figure. The search continues. Oh and on a side not, I contacted my local dodge dealer and they told me they do not keep new spoilers in stock in the parts department. I was like  :clueless: And the guy was like yeah! They're special order. Disappointing. I'd hate to be a turd and order one only to cancel but just may have to.  :haha:

dave73

You could mold one out of fiberglass or build it out of steel/aluminum. Doubt you'll find an easy bolt on solution, I'd start building


918Muscle

#18
*****UPDATE******

I decided to purchase a 1970 T/A ducktail spoiler from David at Roseville. I cut and shaped the ABS, heated and built the spoiler back up. Filed, sanded and blended. Now all it needs is primer and organisol paint. I wanted a slightly more aggressive look. It's going to match the front spoiler by Randy great. Very pleased with the results.

OH and I know the spoiler is not mounted in the correct dodge location. I mounted it where I think it looks best.

dodj

Quote from: IRON MAN on May 05, 2019, 10:20:36 AM
A 70-71 Challenger named "Shake Down" has a custom-made modern type spoiler.
Shake Down is actually a '73 Challenger...
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

nsmall

Not sure how it's "supposed" to look, but you did an awesome job and that's all that matters.

I think it's always best to make your car fit your style.  Life is too short to please the masses.

Chryco Psycho



Daveh

Really looks great.  I like the look.   :banana:

dave73

Awesome! That's exactly how I was thinking you should do it. Looks cool. I mounted mine in the same location, I liked it better there as well

Katfish

What is the "right" location?
Looks normal to me?

JS29



anlauto

Are they hollow inside ? how did you make it whole again ? Looks very cool :bigthumb:

Location looks normal to me too ? What is it, a tiny bit further back ?
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

918Muscle

The correct Mopar location is a little further from the chrome tail panel trim. I am just not a fan of that gap. To me it looks more seamless the way I mounted it.

Jay Bee

I was curious of the location too so after Googling I took this from the web.

918Muscle

Quote from: anlauto on October 10, 2019, 07:14:54 AM
Are they hollow inside ? how did you make it whole again ? Looks very cool :bigthumb:

Location looks normal to me too ? What is it, a tiny bit further back ?

Yes, the spoiler is hollow inside. After cutting the notch, I used the abs that I cut out to fill the same hole. Heat gun to make the abs pliable and shaped it to the opening. Filed ends to make it clean. Used a heat pen and remaining abs pieces to melt and fuse it back together. Then I sanded smooth and put a little bondo on to smooth out any uneven portions (which there wasn't much uneven). Currently the spoiler is ready for primer, final sanding then some organisol black. I'm also painting the tail panel organisol black to match. The job seemed a lot more intimidating then it actually was.