Repop RH mirror...

[FSHTAIL]

So I bought a repop RH mirror for my non RH equipped car.   
I've got the mirror, gasket and 2 screws. 

What are the screws going to secure to?



Sent from my SM-G930T using Tapatalk

[Brads70]

Use Nutserts and stainless machine screws. That worked for me anyhow. Not sure if it's " correct" or not?

https://www.harborfreight.com/45-piece-threaded-insert-riveter-kit-1210.html

[Chryco Psycho]

Correct for 70 only

[HEMICUDA]

Use Nutserts and stainless machine screws. That worked for me anyhow. Not sure if it's " correct" or not?

https://www.harborfreight.com/45-piece-threaded-insert-riveter-kit-1210.html

Maybe it was me, I didn't have much luck with the Harbor Freight kit I bought.  It seemed I had to tighten the insert so tight where it wouldn't spin, I pulled the threads out of the aluminum insert.  I sourced the 10-24 inserts in steel like the originals were, my next problem was the cheaper tool wouldn't work with the steel inserts.  I ponied up and bought the Mac Tool nut setter and all the problems went away, loaned it out many times to friends over the years.

[MoparDave]

http://www.rosevillemoparts.com/product_info.php/p/mirror-mounting-kit-70-74-b-e-body/products_id/6879

[Cuda Cody]

Some more info on Nut Serts..

https://forum.e-bodies.org/cuda-and-challenger-general-discussion/2/mounting-70-74-ebody-rally-mirrors/1628/