Main Menu

Scoop Gaskets?

Started by Wedg2Go, June 26, 2017, 12:47:11 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Wedg2Go

I hope I can describe this right. Under each scoop, on the power bulge hood, is a gasket that follows the outer perimeter of the scoop. Mine are starting to peek out from the edges after taking it out for a little father day cruise. I have taken off one scoop and found that the gasket is still too close to the edge of the scoop. Am I missing something here or do I need to apply something to the gasket to make it stick to the scoop (wet the gasket maybe)? I know this is so simplistic but I just want to be cautious here.

Sent from my SM-G930V using Tapatalk


anlauto

Trim them with scissors :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Cuda Cody



Wedg2Go

Ah! Why didn't I think of that? I should know repop parts are always a little oversized.

All this thin air in the mountain can sometimes be too much for me.

Thanks!



Sent from my SM-G930V using Tapatalk