Window trim clips locations

[leglhi]

Can anybody share with me the amount of front and back window trim clips and locations.Body shop covered some up in front possibly and never drilled new ones in the new Dutchmen panel i rear.I have all new clips and figured i could just evenly space them around but thought maybe there was a more correct way to go about it.Thanks.

[Cuda Cody]

What year is your car?  1970 is a 1 year only style with the holes and the 1971 went to a pin & clip style.

You're going to find what you need here in this thread:

https://forum.e-bodies.org/reference-material/18/e-body-hole-locations-firewall-door-interior-ect/303/

[nsmall]

Sorry I cant help you with this one.  Someone has to have some pics.  Do you have the studs/screws in order to install for the clips?

[leglhi]

Thanks guys for the replies,i have a 70.I bought all new clips and screws and have had them around for a while now dreading drilling holes in the new paint.I'll check out that thread Cody,thank you.

[Claudia]

Here are a few pictures that may help . . . these are from a '71.
Sorry, I don't have any measurements.

[shawge]

For the 70 style, is there supposed to be some sealant on the screws?  My set does not have any and I am wondering if I should add a little bit but not enough to interfere w/ the clips.

[RUNCHARGER]

It wouldn't hurt. Generally if I forgot to measure the holes for the clips I look at the old window moldings and they'll show you where they were.