1973 Dodge Challenger rallye 340 4 SPEED

[MasonDaniel7]

1973 Dodge Challenger rallye 340 4 SPEED On Ebay

https://www.ebay.com/itm/1973-Dodge-Challenger-rallye-challenger/273972253695?

[JS29]

Cheater panel on right quarter! rear valence panel fit is not vary good.

[RUNCHARGER]

Looks okay for the current bid but I wouldn't consider buying it without personally inspecting the body.

[ragtopdodge]

Ya, could be a foot of mud under that paint.

Still...340-four speed e-body at $20k isn't TOO bad.

[Hemi1632]

Cheater panel on right quarter! rear valence panel fit is not vary good.

??? What are you seeing? Can you show me so I could learn what to look for? (I am scared to post pictures of my car up here) LOL

[JS29]

@Hemi1632  The wheel well lip of the quarter panel is to wide, and don't look factory. and look at how the rear valance were it meets the lower quarter panel go together. tell tail signs of after market sheet metal.                     another thing to look for is to look and see spot welds. I would not recommend running your fingers around the wheel well area, one may cut themselves on the wire or the jagged edge's of the mig welds. and to further educate your self, also look really well inside the trunk for the seam of the patch panel.     

[Hemi1632]

@Hemi1632  The wheel well lip of the quarter panel is to wide, and don't look factory. and look at how the rear valance were it meets the lower quarter panel go together. tell tail signs of after market sheet metal.                     another thing to look for is to look and see spot welds. I would not recommend running your fingers around the wheel well area, one may cut themselves on the wire or the jagged edge's of the mig welds. and to further educate your self, also look really well inside the trunk for the seam of the patch panel.     

Thank you sir! You have a very keen eye! I hope to keep learning, please keep pointing stuff out. It is appreciated!