Main Menu

1970 Challenger V code PCV and booster hoses routing question?

Started by 750-h2, December 06, 2018, 07:42:10 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

750-h2

On the A/M engine from the factory did the PCV valve hose and brake booster hose rout underneath or above the throttle cable bracket. Looking at numerous pictures I have seen them routed several ways? Not sure which way is correct? :notsure: Thanks

1 Wild R/T

There is a tab on the throttle bracket that hooks downward, It's purpose is to securely hold the hose out of the way of the linkage....

750-h2

There is room in this hook for only one hose. I assume its for the PVC hose? If so does the booster hose go underneath or above the throttle cable bracket? Thanks!


1 Wild R/T

PCV goes under the bracket, power brake vacuum hose goes back toward the firewall... But I've seen both hoses routed through the bracket, it's snug but they will both fit & that keeps them from binding up the linkage...

anlauto

PCV under bracket, brake hose over throttle cable in my opinion.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration